Ways to Replace Your Window at Home

     Many homeowners will consider doing the job of replacing their windows after an unusually high estimate for replacing windows.  With fewer bells and whistles and lot more uncertainty, the process of window replacement is pretty much the same as how professional window companies do it.  

 However, if you are not capable of doing the job by yourself or you are lacking the necessary tools to perform the job properly, then there are many companies that you can ask assistance such as home window repair that offers high-quality services and guarantees that their clients are fully satisfied with their work. 

    You Need to Find the Correct Type of Window 

    Typically, there are many windows that are suitable for new home or extensive remodels that will involve slight changes to the exterior portion. To allow the window to be nailed flat against the outside part of your house, they are composed of nailing fins attached to the perimeter of your window. 

    Ensure the Space of Window Accurately 

    You can start from the inside part of your home. The part of the window that moves is called the sash. To prevent the sashes from falling inward into your house,there are those thin vertical pieces of wood or vinyl. So that the replacement window that you order will surely fit in the opening, you must keep the smallest measurements. 

    Be Cautious When Removing Trim and Window Stops 

    You must not damage the surrounding materials when you remove the old window. To remove the tops and trims, you can use a pry bar, utility knife, screwdriver, and delicacy. To slice the paint that may stick the stop to the window frame, you can use the utility knife. For guarding the surrounding materials when you use the pry bar, wood shims are of great help.  

    Take Care of Sash Weights, Cords, and Pulleys 

    Cut any sash cords or chains after you remove the sash. It is advisable that you remove them using weights. You must be mindful that they need to be handled safely and must be disposed of properly since they are often contaminated with lead. 

     You can also just let them fall in your pockets if it is not possible to remove them. Let the rest fall down by cutting away any exposed rope. The outside sash should be moved down and get the parting beads. They are simply those vertical strips that keep the sashes intact. You can discard them since you will not be needing them again. 

    Do Rough Installation First 

    Set the new window in the existing window opening and get feel for how it will fit prior to nailing, caulking, or doing any non-reversible procedure. You must observe how the shim fit into place. Make marks on the wall that will indicate where it will go once the shims are in place. 

    Fitting the Window  

    Put the Window in the opening and use your square to secure that all corner are equal and fits well. To square out the window, taps in the shims where it is marked. Since you will be removing them later, leave about one-inch stick out.